Propellerhead Reason - 3.0 - Control Surface Details Guia do Utilizador descarregar pdf (Página 12)

UC-33 (original version)

Requirements/Setting up:

• To use the UC-33 with Reason, you must select preset 21, and make sure that this

isn’t changed from the factory settings.

• You can restore the UC-33 to factory settings by holding down the + and - but-

tons when you turn the keyboard on - note that this restores all presets to factory

settings, deleting any changes you have made.

• We strongly recommend that you connect the UC-33 to a separate MIDI port (or

use USB). If you connect the UC-33 to the same MIDI port as a MIDI keyboard,

you will not be able to play all keys on the keyboard. This is because the UC-33

maps some keys to transport functions and various buttons, and if the UC-33 and

the keyboard are connected to the same MIDI port, Reason cannot separate them.

If you connect the UC-33 and the keyboard to separate MIDI ports, this is not a

problem.

About the default mapping:

The UC-33 features a number of overlays for different Reason devices (from previous

Reason versions). In the default mapping of the UC-33 we have tried to keep the map-

ping according to the overlays, where possible. This means that you can still use e.g.

the Subtractor overlay when you're controlling a Subtractor with the UC-33 (although

you no longer have to switch to a Subtractor preset!).

However, in some cases we had to rearrange the numpad buttons to make room for

the patch selection, target track and transport functions - this is noted below.

D The following buttons are used for global Reason functions:

Numpad buttons 4 and 7 are used for Target Previous/Next Track.

For devices with patches, numpad buttons 6 and 9 are used for Select Previous/

Next Patch.

The four transport buttons (stop, play, rewind and fast forward) are mapped to the

corresponding transport functions in Reason. The numpad 0 button is mapped to

Record.

D Mixer 14:2

There are four keyboard shortcut variations. In variations 1-2 channels 1-8 are con-

trolled, with the two upper rows of knobs controlling EQ and Aux Sends, respec-

tively. In variations 3-4, channels 9-14 are controlled in the same way. The faders

always control the levels, and the lowest row of knobs controls the pan. The mas-

ter level is mapped to fader F9 in all variations.

D Subtractor

This is mapped as on the Subtractor overlay, with the following exceptions:

Numpad 1 is mapped to Filter Env Invert (Osc 2 on/off is not mapped).

Numpad 8 is mapped to Filter2 On/Off.

D Malström

This is mapped as on the Malström overlay, but the numpad and transport button

mapping is changed. The following parameters are controlled by the numpad but-

tons:

Numpad 1 : Filter B On/Off

Numpad 2 : Filter B Env

Numpad 3 : Filter A On/Off

Numpad 5 : Filter A Env

Numpad 8 : Modulator A On/Off

D Redrum

There are two keyboard shortcut variations, controlling drum 1-8 and drum 9-10,

respectively. The faders and knobs are mapped according to the Redrum overlay.

On the numpad, button 1 controls the Pattern Enable switch, button 2 steps

through pattern 1-8 within the current bank and button 3 selects bank.

D BV-512 Vocoder

The faders control the band levels. There are four keyboard shortcut variations, de-

termining which vocoder bands should be controlled by the faders.

D Matrix

On the numpad, button 1 controls the Pattern Enable switch, button 2 steps

through pattern 1-8 within the current bank and button 3 selects bank.

UC-33e

Requirements/Setting up:

• You must connect the UC-33e via USB or two-way MIDI.

• Reason will automatically find the UC-33e if you click the Auto-detect button on

the Control Surfaces and Keyboards page in the Preferences. If you add the UC-

33e manually, you need to specify both MIDI Input and Output ports.

• When you add the UC-33e (manually or by using auto-detect), Reason will upload

custom settings, overwriting preset 2. After this is done, you need to select preset

2 on the UC-33e.

About the default mapping:

The UC-33e has the same mapping as the UC-33 (original version). See above.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Comentários a estes Manuais

Sem comentários

Propellerhead Reason - 3.0 - Control Surface Details Guia do Utilizador Página 12

Comentários a estes Manuais