Propellerhead Reason - 1.0.1 Manual de Operações descarregar pdf (Página 13)

THE SEQUENCER

Redrum notes

When you use this function with the Redrum, you should note the following:

• The notes will have the pitch of the corresponding drum sound (see

“Using Redrum as a Sound Module” on page 96) and the velocity

depending on the Dynamic value.

Soft notes have velocity 30, medium notes have velocity 80 and hard

notes have velocity 127.

• You probably want to turn off the “Enable Pattern Section” switch

on the Redrum device panel.

Otherwise, the drum sounds will be “double-triggered” when you start

playback (once by the pattern section itself, once by the main se-

quencer).

Matrix notes

When you use this function for the Matrix, you should note the following:

• A note will be created for each pattern step with a gate value other

than zero.

The notes will have the pitch according to the key CV value for the step,

and the velocity according to the gate value.

• The curve CV is not copied.

• Make sure that the track is connected to the correct device!

Having the track connected to the Matrix itself is pointless, since the Ma-

trix cannot produce any sound.

• You may want to disconnect or even remove the Matrix after per-

forming a “Copy Pattern to Track”.

This is because you probably don’t want both the Matrix and the se-

quencer notes to play back at the same time.

The “Convert Pattern Track to Notes” function

If you have recorded or drawn pattern changes on a Redrum or Matrix track,

you can have the whole track converted to notes, in the following way:

1. Select the track with the pattern changes.

2. Select “Convert Pattern Track to Notes” from the Edit menu or the

context menu for the track.

For each bar, the corresponding pattern is converted to notes on the

track (following the same rules as for the “Copy Pattern to Track” func-

tion). The track will play back just the same as when you played the pat-

tern device with the pattern changes (including the Pattern Enabled/Mute

switch).

➜

All pattern changes are automatically removed from the track after

the operation.

Redrum notes

• The “Enable Pattern Section” switch is automatically turned off

when you use this function.

Matrix notes

• After performing “Convert Pattern Track to Notes”, you need to

move the contents to another track, or re-route the track to another

device.

Having the track connected to the Matrix itself is pointless, since the Ma-

trix cannot produce any sound.

• You may want to disconnect or even remove the Matrix after per-

forming this function.

This is because you probably don’t want both the Matrix and the se-

quencer notes to play back at the same time.

In these sections, the pattern

was muted (Pattern Enable off)

in the pattern track.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 206 207

Comentários a estes Manuais

Sem comentários

Propellerhead Reason - 1.0.1 Manual de Operações Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Software Propellerhead Reason - 1.0.1