Propellerhead Reason - 1.0.1 Manual de Operações descarregar pdf (Página 99)

REDRUM

Connections

On the back of the Redrum you will find the following connections:

For each drum sound channel:

Others

Connection

Description

Audio Outputs There are individual audio outputs for each drum sound

channel, allowing you to route a drum sound to a sepa-

rate channel in the mixer, possibly via insert effects, etc.

For mono sounds, use the “Left (Mono)” output (and pan

the sound using the Pan control in the mixer).

When you use an individual output for a sound, the sound

is automatically excluded from the master stereo output.

Gate Out This sends out a gate signal when the drum sound is

played (from a pattern, via MIDI or by using the Trigger

button on the device panel). This lets you use the Re-

drum as a “trig sequencer”, controlling other devices.

The length of the gate signal depends on the Decay/Gate

setting for the sound: In Decay mode, a short “trig pulse”

is sent out, while in Gate mode, the gate signal will have

the same length as the drum note (see page 94).

Gate In Allows you to trigger the sound from another CV/Gate de-

vice. All settings apply, just as when playing the drum

sound conventionally.

Pitch CV In Lets you control the pitch of the drum sound from another

CV device.

Connection

Description

Send Out 1-2 Outputs for the send signals controlled with the S1 and

S2 knobs, as described on page 93.

Stereo Out This is the master stereo output, outputting a mix of all

drum sounds (except those for which you use individual

outputs).

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 206 207

Sem comentários

Propellerhead Reason - 1.0.1 Manual de Operações Página 99